Model #LNC6762B71 ADMIRAL residential washers

  • Control Panel
    3 Results
  • Supplemental Information
    3 Results
  • Top
    3 Results
  • Cabinet
    3 Results
  • Tub
    3 Results
  • Transmission
    3 Results
  • Base
    3 Results
  • Wiring Information
    3 Results
  • Transmission (series 17)
    3 Results
  • Base (series 19)
    3 Results
  • Wiring Information (series 20)
    3 Results
  • Transmission (series 22)
    3 Results

Question and Answers

Q:

Why is the agitator floating in my admiral top load washer.

A:

Thank you for your question and I understand your concern. There should be small hole maybe a little bit larger than the shaft of the screw going through the auger and agitator and the head of the screw should prevent the auger and agitator from pulling through the small hole. If the head of the screw is too small I could see the auger and agitator pulling/floating up while the screw is still threaded into the agitate shaft.

Now, if the agitate shaft and agitator assembly is sliding/float up, then the gear case will have to be replaced.

Read More
Joey S -
Sears Technician
January 28, 2011

Top Parts