Model #LGR4634DQ0 WHIRLPOOL Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • 3401771 Burner Assembly
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Can you help me with a wiring diagram?


I know how important it is to have a good working dryer in your home so that you can dry your washed clothes. While you are waiting for an expert answer, I did manage to find a link that will provide you with some information about what may be causing your problem. I hope my link is useful.

Read More
Joseph P. -
March 16, 2011

Thank you for your question.

I am sorry you are having a problem with the dryer. I have provided you with an image below that has the wiring diagram. I have traced the heating circuit. The red is the L1 side and the green is the neutral side. I have circled the possibly defective components. I recommend unplugging the dryer first. Then locate each component and remove at least one wire and ohm it out. If any of the switched show open it is defective. In most cases, it is going to be the thermal fuse.

The bias internal is a heater that is inside of the thermostat. When you have the temperature switch to low temperature it turns the bias internal on to heat the thermostat causing it to open sooner, thus resulting in lower drum temperature.

Please reply below with more details if you need further assistance.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 18, 2011
See more answers

Top Parts