Model #LEN2000KQ1 WHIRLPOOL Residential Dryer

  • Cabinet Parts
    3 Results
  • Top And Console Parts Optional Parts (not Included
    3 Results
  • Bulkhead Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


No heat LEN2000KQ1 Whirlpool Residential dryer


Thank You for choosing Sears and being a valued member. It is unfortunate to hear that you are having issues with your dryer and I do understand your frustration. Glad to help out. I'm looking at your model number len2000kq1 and I recommend checking the breakers (or fuses) in your house electrical panel first. The dryer will run if only one of the 120 volt legs of 240 volt power is supplied to the dryer. If the second leg of 120 volt power is missing, then the dryer will not heat. If the breakers are okay, then I recommend checking the voltage at the outlet using the image in the diagram below. NOTE: You should only check this live outlet voltage yourself if you are completely confident in your technical ability to safely measure it using a volt/ohm meter. If the outlet voltage is okay, then I recommend unplugging the dryer and checking the wiring connection on the terminal block on the back of the dryer. Check the continuity through the power cord as well. If these checks are all good, then I recommend removing the back panel of the dryer (with it still unplugged) and checking the thermal cutoff and operating thermostat in the back of the dryer. To check these, pull one wire off of the component and measure the resistance across the leads of the component. Each of these components should measure near zero ohms of resistance (closed).If the component is open (measures infinite resistance), then it will need to be replaced. Here is a link for a video that will help. I trust this information will help you.


Thank you for choosing Sears


SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
October 21, 2014

Top Parts