Model #L36 (2007) LYNX grill, gas

Thank you for your question.

I am sorry you are having a problem with the snow blower. Without a model number I will only be able to give general information. By the symptoms you are having I suspect the problem is dirty passages in the carburetor. When the passages start to plug up the engine does not get the needed fuel to run smoothly. Then when you choke the engine, it delivers more fuel and the engine will smooth out. To cure the problem I recommend cleaning the main jet in the carburetor. You will need to purchase a can for carb cleaner from the local auto parts store. Then click on the following link to watch a video on how to clean the carburetor. How to clean snow blower carburetor

The engine may not be the same but it will give you an idea on how to do this. I have provided you with an image showing the break down of a different carburetor.

Please use extreme caution when dealing with fuel.

Then after you have cleaned the carburetor, start the engine and slowly turn the choke off.

Please let me know if you have any other question on this problem by replying below with a model number and more details.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Thank you for your question.

I will be happy to assist you. I have looked up the model number you have submitted. The normal cycle should default to high-speed spin. The manual does not state the spin speed for the sheets and towel cycle. If I remember correctly, it should default to high speed. I have not had my hands on one of these in a little while.

I hope this is helpful.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

I found the instructions for the HD forward controls. Here is the install instructions .