Model #KV-32S45 SONY Direct View\Digital 27" to 40" TV

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers


How can I set the convergence on my Sony KV-32S45 without calling a TV repair service?


I changed your model from KV-32545 to KV-32S45 since I believe that's the one you are talking about. Convergence aligns the red blue and green over each other on projections sets. This is a single tube TV with the red blue and green already inside. When a color starts to flare out to the side it is usually a sign of a bad tube along with a weak/dim picture and bad grayscale (turn the color off and you won't have a true black and white image).

If it is not a flare and is in fact misaligned on the corner, then a tech is going to come to your home, take the back off and use magnets to try and get it as close as possible. If it is very miniscule I would not bother since there’s no way a tech can get it perfect and there’s no way to know how much he can actually improve it.

The only other thing that pops into my mind is a purity spot. The degaussing circuit should be taking out any magnetization on the frame and tube but it may have stopped working. I do not have a remedy for this either that you could do without taking it apart.

Read More
David A. - Personal Solutions Manager -
Sears Technician
February 28, 2009