Model #KUDM01TJWH0 KITCHENAID dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm And Strainer Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have kitchenaid dishwasher model kudm01tjwh0. no power at front panel. and find the thermel fuse is blow out.

A:

That link for a previous answer that Henry posted in the above response has some good advice. You should have received a kit when you replaced that thermal fuse. The kit part number is 8193762. The kit should have had instructions (shown below).  Be sure that you use that entire kit and follow the directions that are shown in the image below when replacing that thermal fuse. 

 

If you installed the kit properly and the thermal fuse is blowing, then you could have a problem with the heater circuit, the electronic control board or one of the loads connected to the control board. In that situation, you will probably need to have a service technician examine the dishwasher and repair this problem. You can schedule service through this link: Sears Home Services Dishwasher Repair. 

 

If you need more help, reply with additional details and we will assist you further. 

Read More
Lyle W -
Sears Technician
March 01, 2013

Top Parts