Model #JUNIOR SERIAL #M0100970 AND UP TROYBILT Rear Tine, Gas Tiller

  • Handlebar Assembly & Control Levers
    3 Results
  • Hood, Bracket & Depth Regulator
    3 Results
  • Engine & Support Brackets, Pulleys, Belts, Belt Cover
    3 Results
  • Forward/reverse Idler Assembly
    3 Results
  • Bolo Tines, Wheels
    3 Results
  • Transmission Housing, Covers, Seals, Gaskets & Plugs
    3 Results
  • Drive Shaft, Input Pinion Shaft & Gear Assemblies
    3 Results
  • Wheel Shaft & Tiller Shaft Assemblies
    3 Results
  • Hiller/furrower Part #20868
    3 Results
  • Marker Blade And Arm Assembly
    3 Results
  • Bumper & Carburetor Guard Attachment - Part #11045
    3 Results
Find part by diagram >

Question and Answers

Q:

My power mate junior is not work

A:

Thank you for your question on the power-mate Jr. not working when you attach it.

The plug on the back of the power mate Jr. goes directly to the motor.

Please make sure you are docking the Jr. completely into the handle to make sure the electrical connector is making good connection.

You may want to examine the connections on the handle so see if they are damaged and spread open so the pins from the Jr. with not make contact.

If that is not the case then I would say that the motor in the Jr. has failed. This is not a repairable part and is not available for replacement.

If you discover that the motor has failed and you want to replace the power mate Jr. I will give you a direct link for a replacement.

Power mate Jr. complete .

Please let me know what you find out.

Sam A.

Read More
Sam A -
Sears Technician
July 11, 2012
Q:

Vacuum: How do I get Power mate junior agitator to rotate fast?

A:

Thank you for your question.

I can understand wanting to use you power mate jr. for cleaning upholstery.

I cannot find the model as you have listed in the pars look up system. If it has an 116.5XXXXX number on the power mate jr. maybe this will help. It looks like they put a Panasonic model number on the PM jr.

I will send a picture of the one I did find and this model has the end caps on the roller brush unscrew and can be replaced. But your model may not come apart that way.

Since you were able to remove the end caps the bearings may have overheated and now the bearings are dry and that could be causing the noise.

If you have some white lithium grease you could put just a little on the bearing end caps to see if that will help.

Normally you don’t put any lube on the bearings because they have oilite bearings.

You may have to purchase a new roller brush if we can find a model number that will show us the parts breakdown.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
January 24, 2011
Q:

The armature on the motor of my Powermate junior turns but he belt does not turn the brush head. The belt is brand new and correct part number (4368510)

A:

You should remove the roller brush and clean the bearings. Remove any string or other foreign items in the roller brush area.

If the bearings have failed on the roller brush, you can buy a complete roller brush assembly with new bearings. The part number of the complete roller brush is 8192535, and the cost is around $40.00.

Read More
Jimmy K -
Sears Technician
April 23, 2010