Model #HRS216SDA HONDA walk behind lawnmower, gas

  • Front Wheel Assembly
    3 Results
  • Rear Wheel Assembly
    3 Results
  • Carburetor Assembly For Hondas
    3 Results
  • Air Filter Assembly For Honda
    3 Results
  • Handle Assembly
    3 Results
  • Deck/cutter Housing
    3 Results

Question and Answers


Honda Mower HRS216SDA clutch cable for wheel drive.


Thank you for your question. I am sorry you are having a problem with the mower. I searched for a set of written instructions for the cable. The manufacturer does not put out repair manuals for these mowers.  To replace the cable start at the top first. Disconnect the cable from the lever and snip the cable ties along the handle. Next turn the fuel off and disconnect the spark plug wire. Tip the mower onto its side so the air filter is up. Once it is tipped you can access the bottom of the mower. If you can not see the cable there should be a shield that has to be removed. Remove the shield to access the cable. Once you have access to the cable make note of how the cable is routed and connected. Now disconnect the cable and remove it from the mower housing. Finally connect the new cable in the reverse steps. Be sure the new cable is connected and routed the same as the old cable.   I hope this is helpful. If you need further assistance, please reply below with more details.  Thank you for using Manage my life. Mark 

Read More
Mark T -
Sears Technician
March 15, 2013

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show