Model #GSX-140 CITIZEN printers

  • Drawing No. 1 General Assembly (rev. 0)
    3 Results
  • Drawing No.2 Mechanism Unit (carriage & Ribbon Feed) (rev.0)
    3 Results
  • Drawing No.3 Mechanism Unit (paper Feed) (rev. 0)
    3 Results
  • Drawing No.4 Lower Case (rev. 0)
    3 Results
  • Drawing No.5 Color Kit (option) (rev. 0)
    3 Results

Question and Answers

Q:

Lawn Tractor #917 287 140

A:

Thank you for your question. The bagger I show listed for the tractor is 917249030. I looked up the lower chute for that model and it is part number 405455. the lower chute can be ordered from our parts website: Sears Parts Direct . I believe the lower chute is compatible with the bagger you have. We do not have any bagger here to confirm the tube sizes.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 16, 2011
Q:

What pressure does part number Z-D21299 switch cut off at? My 125PSI comp. reaches 140 and hasn't cut off yet.

A:

The 125 psi pressure switches will normally open between 125 and 140 psi.

Be sure the safety valve is working by pulling the ring and letting it cut off by itself as the pressure goes down. After verifying the safety valve is working, let the pressure in the tank reach 150 psi. If the pressure switch turns off before the pressure relief opens, you can use the compressor with the old pressure switch.

If the pressure relief opens, replace the pressure switch. I would recommend replacing the pressure switch for safety reasons either way.

Read More
Jimmy K -
Sears Technician
December 22, 2009
Q:

kenmore elit dryer, # 11064992300, takes too long to dry, thermometer reads 160 then drops to 140, on and off every 60-120 seconds

A:

This type of problem is normally caused by a restriction in the exhaust air flow to the outside of your home. The video that James R. provided in the above response gives some excellent tips for checking this issue. I recommend that you check the items shown in that video.

The temperatures that the dryer is cycling at are normal. The short cycle times of the element point to the restriction in the exhaust air flow described above.

This information should help you resolve this dryer problem. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 06, 2011