Model #GPS-75 AO SMITH water heater, gas

  • Cabinet Assy
    3 Results

Question and Answers

Q:

"GPS NAVIGATORS"

A:

The difference in pricing for GPS navigation devices is the screen size and the power of the computer inside. The higher end models will have better routing systems to calculate the best route from point A to point B. If you have a smart phone, download a navigation app and try it out. If you are comfortable with your phone's screen size and ability to navigate you, buy a stand for it and sticky tack it down to whatever vehicle you are in.

Read More
David A. - Personal Solutions Manager -
Sears Technician
July 09, 2010
Q:

Error 75, P5

A:

The fault codes for this type of range (model 790.78909000) are shown in the first image below. I do not see an error 75 or a P5 listed. I also do not see the 02 error code. Unplug the range to disconnect electrical power. Leave it unplugged for 5 minutes. This may reset the control board. After you plug the range back in, see if you can set the clock. If you can set the clock and the control works properly, then you can continue to use the range. The control may have experienced a power surge or glitch through the electrical lines that scrambled the control board.

If you reset the control board using the procedure described above and the control still won't work, look for one the error codes shown in the image below. This may help you determine the cause of your problem.

If you still don't see one of the error codes on the list shown below, I recommend that you have a service technician examine the washer. You may need to have the electronic control board replaced. Here is a link for the Sears Service website: Sears Home Services .

If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
February 28, 2011
Q:

attn: Dale Webb - My old Sears Roebuck belt sander model 1030383 needs sanding belts.

A:

The model number you sent brings up a message, No parts available for this model.

You might measure a belt or what the dimensions a belt would need to be, and search on the internet. You might find someone with the size you need.

I think it is time to clean the sander up and put it in a place of honor in your shop. Let it rest.

Read More
Jimmy K -
Sears Technician
February 02, 2010