Model #G2484-010 SIGNATURE Snowthrower, Gas

  • Electric Start Assembly
    3 Results
  • Headlight Assembly
    3 Results
  • Engine Assembly
    3 Results
  • Frame Components Assembly
    3 Results
  • Drive Components Assembly
    3 Results
  • Gear Case Assembly
    3 Results
  • Auger Housing Assembly
    3 Results
  • Discharge Chute Assembly
    3 Results
  • Wheels Assembly
    3 Results
  • Handle Assembly
    3 Results
  • Shift Yoke Assembly
    3 Results
  • Chute Crank Assembly
    3 Results
  • Decals
    3 Results
Find part by diagram >

Question and Answers

Q:

My Pro Form745cs model 831299470 treadmill grade goes from 0-10 and is stuck on 10. Why?

A:

It is possible your treadmill needs calibration. I am sending you 2 images that give you the instructions for calibrating the treadmill. In level 2 calibrate both the drive motor and the incline motor.

This calibration restores the consoles memory of where the incline is and how fast the drive motor is turning.

If the incline motor doesn't run in the calibration mode the incline motor is bad or a wire is broken or disconnected. Some voltage checks need to be made on the power board to determine if the incline motor is getting voltage. You could have a failed power board, but that is unusual.

I am sending you an image of the wiring schematic for the treadmill if you need to do the voltage checks.

Read More
Jimmy K -
Sears Technician
October 16, 2008
Q:

I got a part for my table saw from Sears. The part nos. match, but the bore in the part is .010 small. Short of a machine shop what can I do?

A:

I am afraid a machine shop is you best bet. The company that manufactured this saw for Sears has not manufactured a power tool for Sears for 10-12 years. We can't get parts easily for them and so I don't think reordering is an option.

We don't have the size of the hole in the arbor support. The hole should be a tight fit for the arbor shaft but it is not pressed on.

Read More
Jimmy K -
Sears Technician
February 16, 2009
Q:

Owners Manual

A:

I emailed the exact owner's manual for that Kenmore refrigerator to you. The manual that is listed in our system pertains to a similar LG model. The controls on that LG refrigerator are probably a little different than the Kenmore refrigerator controls. LG did manufacture this model of refrigerator for Kenmore according to specific Kenmore guidelines and specifications.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
May 12, 2011