Model #FTF2140FS2 FRIGIDAIRE Residential Washers

  • Control Panel
    3 Results
  • Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Frigidaire front load washing machine model # FTF2140FS2 error codes - what do I need to replace?


Thank you for your question and I understand your concern.

Yes, it is likely the control board behind the console. The "Start" LED is not going to flash until you recall the fault/error code.

To recall an error code:


  1. Wake the machine by pressing any button
  2. Wait 5 seconds
  3. Press and hold the Start and Pause Cancel buttons simultaneously.
  4. All LEDs will go blank and after a few seconds the control will signal the stored code using audible beeps and blinking LEDs. The control will repeatedly signal the code, as long as the Start and Pause Cancel buttons are pressed. A two second pause between repeats affords you the ability to make accurate counts to identify the correct error codes.
I added an image below to reference. I believe it will likely need a new console control board.
I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 


Read More
Joey S -
Sears Technician
October 18, 2013

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show