Model #FRS26F4CW1 FRIGIDAIRE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Refrigerator Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • Controls
    3 Results
  • System
    3 Results
  • Dispenser
    3 Results
  • Ice Container
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


Directions needed to replace label module 240570204 on refrigerator FRS26F4CW1 FRS26F4CW1


Thank you for choosing and being a valued member. I can certainly assist you in locating the instructions to replace the label module on your refrigerator dispenser. 

1. Pull up and out on the dispenser cover to remove and replace the module. 

The label module peels off. 

You can heat it to make the old one come off easier, Once off, before attempting to apply the new part, clean the old adhesive material from the surface with rubbing alcohol and a paper towel. Once all of the old adhesive is removed and the surface has completely dried, you can carefully stick the new part on being careful to apply it straight, since peeling the new part back off will destroy it. 

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.


SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 16, 2015

Top Parts