Model #FKCH17F7HWA FRIGIDAIRE all refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • System
    3 Results


Error Codes

Error Code:



Question and Answers


Convertible freezer/refrigerator works in fridgemode but not freezer mode


The wiring diagram for your freezer/refrigerator is shown in the first image below. You could have a problem with that switch or with the freezer control. There is a chance that you could have a wiring failure between those components. If you have a volt/ohm meter, you can unplug the freezer/refrigerator and check the continuity through that switch in that freezer mode. You should measure continuity between terminals 2 & 3 and terminals 5 & 6. That information is shown in the second image below. The third image shows how to access components in that control (with the freezer/refrigerator unplugged ).

If the switch is bad, then it will need to be replaced.

If the switch is working properly, then you should have power to the freezer control board. You can check the wiring connections. If the wiring connections are good, then you will probably need to replace that freezer control board.

You can order parts from this page: Frigidaire Freezer/Refrigerator Model FKCH17F7HWA Cabinet Parts . As noted above, be sure that you unplug the freezer/refrigerator before accessing internal components.

These tips should help you fix that problem in your freezer/refrigerator. The parts are not very expensive. If you need more assistance, reply with additional details.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
August 01, 2012

Top Parts