Model #FGHD2465NF1A FRIGIDAIRE Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor & Pump
    3 Results
  • Frame
    3 Results
  • Racks
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >


Question and Answers


I have received parts #809006501 gasket and #154701001 splash shield kit. I need instruction sheet on how to install them properly. FGHD2465NF1A


Error code Model # FGHD2465NF1A


Thank you for your inquiry on your Frigidaire Dishwasher, Model: FGHD2465NF1A. From reviewing the details on your model, according to the information on this dishwasher it appears that the ER would indicate a membrane switch failure. 

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dishwasher to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.


I hope this answered your question. Thank you for contacting, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
August 07, 2015

fault codes for my frigidare gallery dishwasher FGHD2465NF1A Frigidaire Dishwasher


Thank you for choosing and being a valued member. I can certainly assist you.

These are the only error codes I am seeing for this model.

PF..........A power failure has occurred
Hd or HO.........Water heating delay
CL..........Close and latch the door
‘01-24’- ...Hour(s) delay before Start (some models)
ER/ER....Switch Failure
ER/CE....Configuration Error
ER/uo.....Vent will not close
ER/uF.....Fan not running

SENSING- ---------------------- Turbidity sensor is checking the condition of the wash/rinse water. No sensing for LIGHT WASH (UPPER RACK), LIGHT WASH (LOWER RACK) and CHINA/CRYSTAL.
WASHING- ---------------------- Wash portion of cycle.
SANITIZED--------------------- The SANITIZED criteria has been met. 
DRYING------------------------ Drying portion of cycle. Indicator light will switch off when door is opened.
CLEAN------------------------- Shows completion of cycle. Indicator light will switch off when door is opened.
OPTION LED's Flashing
-- HI-TEMP WASH and NO HEAT DRY/POWER DRY OFF LED's flashing indicates power failure has occurred. 

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 26, 2015

Top Parts