Model #FGF316WGSG FRIGIDAIRE free standing, gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results

Question and Answers


oven does not light FGF316WGSG Frigidaire Gas range


Thank you for your question and I understand your concern.

Based on your symptom and details, the oven bake igniter is too weak to pull enough current/amperage to open the gas valve.

Remove and replace the bake igniter and your oven will ignite. The igniter can be ordered from

The bake igniter is part #5303935066 for Frigidaire gas range model FGF316WGSG.

To access the bake igniter, remove the oven racks, the oven floor and the flame spreader. Remove the two screws at the back of the oven floor. Lift the back of the oven floor up and slide it out from under the front of the frame and remove. Remove the nut in the middle of the flame spreader and lift the flame spreader off. You now have access to the igniter and wires. You can cut the wires off near the old igniter and use the ceramic wire nuts to slice the wire back to the two existing wires. NOTE: Disconnect the range from the power source before servicing.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
October 22, 2013

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show