Model #FGC26C3AWB FRIGIDAIRE counter unit, gas

  • Main Top
    3 Results
  • Burner
    3 Results
  • Wiring Diagram
    3 Results

Error Codes

Error Code:



Question and Answers


fgc26c3awb pilot constantly clicking--why is that?


That type of problem is normally caused by a burner switch that is stuck in the "closed" position. I recommend that you have a service technician diagnose and repair this failure. Here is a link for the Sears Service website: Sears Home Services .

If you want to fix this problem yourself, then you may be able to determine which switch has failed by unplugging the range (or shut off the house circuit breaker) to disconnect electrical power and disconnecting the red wire from a burner switch one at a time. Tape the end of the disconnected wire with electrical tape to prevent it from shorting to the metal cabinet. Plug the range back in briefly to determine whether the ticking stops. If not, you will need to unplug the range (or shut off the breaker) and repeat the process to determine which burner switch is causing this problem. Through a process of elimination, you should be able to determine which burner switch is defective. Once you find the defective switch, you can order a replacement switch from the Sears website. Here is a direct link for the replacement burner switch: Burner Switch for Frigidaire Range FGC26C3AWB . Be sure that you unplug the range or shut off the house circuit breaker before accessing and replacing internal components.

These tips may help you fix this problem. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
April 02, 2012