Model #FAX 635 BROTHER Fax Machines

  • Unit
    3 Results
Find part by diagram >

Question and Answers

Q:

Murata M-750 fax machine has no dial tone

A:

I don't have the manual for that Murata M-750 fax machine. You will normally hear a dial tone on the fax handset when the fax machine is connected and configured properly. The image below shows one problem that can prevent some fax machines from working properly. Check the phone line cable for that issue. If the fax machine came with a two-conductor phone cable then you may need to connect it using that type of cable or adapter.

Read More
Lyle W -
Sears Technician
January 29, 2013
A:

Here is the image.

Read More
Lyle W -
Sears Technician
January 29, 2013
See more answers
Q:

need diagnostic technical breakdown sheet and operation manual (unable to locate through your list)

A:

Here is a direct link for the owner's manual for this dishwasher: Owner's Manual . The images below show the tech sheet of this dishwasher. I have also emailed copies of this information to you.

NOTE: The information below is intended for technicians. Follow electrical safety guidelines when using this information. Shut off the circuit breaker to disconnect electrical power before accessing internal components in the dishwasher.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
February 09, 2011
A:

Here are additional images of the tech sheet.

Read More
Lyle W -
Sears Technician
February 09, 2011
See more answers
Q:

Stair Stepper Exercise Machine

A:

Hello Frank. I also looked for information on stepper that you have. The only BodyTech stepper that we have in our parts system is the one that Jerry C. describes above. I did not find any manufacturer contact information. In this situation, it appears that you are correct. We don't have the information that will help you with the replacement of those shocks on your stepper. I apologize that we cannot assist you with that issue.

Read More
Lyle W -
Sears Technician
January 31, 2013
A:

Based on the lack of information and the lack of availability for parts, I recommend that you buy a new machine.

Read More
Lyle W -
Sears Technician
January 31, 2013
See more answers