Model #ED27DQXAW03 WHIRLPOOL Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Unit
    3 Results
  • Air Flow
    3 Results
  • Control
    3 Results
  • Icemaker
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


Leveling refrigerator ED27DQXAW03 Whirlpool Refrigerator


Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the instructions to level your refrigerator. I did look into the model number you have provided and I have found information to assist you. 

  1. Open the refrigerator doors to 90° and remove the toe grille.
  2. Grasp the grille with both hands. Lift up and tilt the top of the grille toward you.

Rear roller adjustment screw

Front roller adjustment screw
  1. Use a 1/2 inch socket wrench to adjust the leveling bolts. Turn the leveling bolts to the right to raise or to the left to lower the refrigerator. It may take several turns to adjust the tilt of the refrigerator.
Note: Do not unscrew the leveling bolts too much when lowering the refrigerator. The bolt head will start to come away from the refrigerator when in the lowest position.
  1. Replace the toe grille.
Let me know if this helps.

You can also visit for parts, diagrams, and repair information.

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 25, 2014

Top Parts