Model #E30EW85ESS2 ELECTROLUX Built-In Oven, Electric

  • Control Panel
    3 Results
  • Upper Oven
    3 Results
  • Lower Oven
    3 Results
  • Doors
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


wiring diagram for E30EW85ESS2 Wall oven E30EW85ESS2 Electrolux Wall oven


Thanks for the inquiry and for using I am sorry to hear of all the issues you are experiencing with the Electrolux Wall Oven, I can only imagine how frustrating that has been for you.

The F14 error code indicates a communication error between the display control board (ES600) and the control panel/touchpad. 

Typically if this error occurs, a technician will multimeter test the board and electrical ribbon to the panel to determine where the fault is coming from. I am surprised it took a technician 5 visits to get a working display but still not fix the issue. Logically, if the control board (ES600) was replaced, and it didn't solve the problem, the control panel would be the next best solution to look at. It could have been possible both the board and the control panel were at fault. However, you raise a good point, if the technicians were that incompetent, they may not have connected the connectors to the right pins. Usually though, the connectors will be a specific fit/size for the pins they belong to, so it's not easy for that to occur.

To help with the diagnosis of the connections, I have included a copy of the wiring diagram for this model. The diagram is a large document, and very difficult to get onto one document to still be clear and legible, so I broke it up into two documents. 

If you don't see the attachments below, click here to see this response on with the attachments. Hopefully this will help and thanks again for using  

Read More
Jeff Wallace Sr -
Sears Technician
October 09, 2013

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show