Model #DQSR483EE0WW GE Residential Dryer

  • Backsplash, Blower & Motor Assembly
    3 Results
  • Front Panel & Door
    3 Results
  • Cabinet
    3 Results
  • Drum
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


do i need a new motor?


A dryer is an appliance we depend on so much, when there's laundry to be done. While you are waiting for an expert to respond I was able to locate some great information that could possibly assist you with your issue. I have added the link below. Hope this helps!

Read More
Yadira B -
February 28, 2013

Thanks for the inquiry about your dryer model dqsr483ee0ww, I will be glad to assist you._Always disconnect power supply before servicing the appliance and be cautious of any sharp metals while accessing components_  Before you replace the motor I recommend that you inspect the drum. It should turn freely with belt removed; any binding could cause the motor to overheat. If the drum is okay then inspect the motor itself, with the power off and belt removed the motor should spin freely without any binding or noise. The problem you describe sound like the motor is overheating and cutting off on the overload, if the motor smells hot or smells of burning wires/plastic then the motor may be bad.      If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services. Ron H.

Read More
Ron H -
Sears Technician
March 01, 2013
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show