Model #DM15HW-14T-MW MAYTAG Countertop Microwave

  • Control Panel
    3 Results
  • Door
    3 Results
  • Base & Cavity
    3 Results
  • Turntable
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore microwave - cooktop light under MW won't work

A:

Thank you for your question.

I am sorry you are having a problem with the microwave. If you are sure the light bulbs are installed correctly I would suspect a loose wire connection or a faulty control board. Because of the extremely high voltage a microwave generates and can store even when unplugged, we do not give repair information on them. We strongly recommend having a service technician replace the control of the microwave. I hope you understand we do not want a customer getting serious injured or worse. We will gladly give repair advice on all other appliances. You can have the microwave repaired at your home by a Sears technician. Here is a link for the website to set up service: Sears Home Services .

Thank you for using Manage my life

Mark T.

Read More
Mark T -
Sears Technician
November 16, 2010
Q:

bulb replacement KEMS307DWH4 Kitchenaid 30" built-in electric oven/mw

A:

Thank you for your question and I understand your concern.

In order to access and replace the microwave oven cavity light will require removing the microwave. This will require a service technician due to high voltage stored even when disconnected from the power supply. It may not have a faulty light bulb. It could have a faulty power transformer that powers up the light.

I am sorry, but we do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. Door repairs and adjustments, even minor ones, can cause microwave leakage, and a microwave shielding leakage test must be performed using a survey meter after any microwave service. That's why I strongly warn you to have this repair handled only by a qualified service technician. You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME.

Normally at ManageMyLife.com we like to help you with all of your repairs, but our expert advice is that microwaves are just too dangerous.

You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME. We thank you for your understanding in this matter and hope we can help you with other questions and repairs in the future.

Read More
Joey S -
Sears Technician
January 25, 2013
Q:

My snow thrower stopped moving - it looks as if a pin that holds the Gear 70T to the axle came off. What is the name of the pin so I can order a new one?

A:

Thank you for your question.

I am sorry you are having a problem with the snow blower. I have checked the model number you have submitted. The pin and the cotter pin are key numbers 17 and 19. I have provided you with an image below showing these parts. The part number for the pin is 711-1364 and the cotter pin is 714-04040. These parts can be ordered from our parts website Sears Parts Direct .

Please let me know if you need further assistance with the parts.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 09, 2011