Model #DBSR463EG6WW GE Residential Dryer

  • Backsplash, Blower & Motor Assembly
    3 Results
  • Front Panel & Door
    3 Results
  • Cabinet
    3 Results
  • Drum
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

we4m533 vs we4m364 dbsr463eg6ww

A:

Thank you for your question and I understand your concern.

I checked the part number for the timer for your model dryer and I show that your model calls for part number WE4M364 timer and it does not show to substitute to part # WE4M533.  The red wire is connected to terminal "B" on the old and the new timer should also have a terminal "B" to connect the Red wire. The correct timer WE4M364 should be a direct replacement timer and it should have the exact same terminals. If the replacement timer is different, then it's not likely the correct timer. Again, I show your specific model calls for timer part #WE4M364 and I do not show it to sub to WE4M365. If it did sub, it should be the same hook up. The timer terminals are usually marked with letters to represent which color wire would connect to the terminals.

Read More
Joey S -
Sears Technician
March 28, 2014
Q:

Dryer repair

A:

Thank you for your question and I understand your concern.

Directly behind the timer dial on the timer knob shaft is small U-clip that must pulled off before you can remove the timer knob.

To remove the Philips head screws behind the control panel; make sure you have the proper size Philips screw driver. If you have a cordless variable speed drill with a torque adjustment, install the proper Philips bit and set the torque setting around 3-4 and then see if the screws will come loose. I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
November 02, 2012

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show