Model #CRG9700CAM MAYTAG Free Standing, Gas

  • Top Assembly
    3 Results
  • Body
    3 Results
  • Oven/base
    3 Results
  • Gas Controls
    3 Results
  • Door/drawer
    3 Results
  • Control Panel
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Question and Answers

Q:

Why won't my Maytag oven work?

A:

I must assume the oven control is showing the time of day which would indicate power to the range. If you hear a faint click from the oven control when you program Bake and start the oven would indicate that the oven control is likely OK.

The most common part to fail is the glow bar Bake igniter. The Bake igniter must glow red hot before the oven gas valve will open and ignite the Bake burner. The floor and the heat shield inside the oven cavity will need to be removed in order to access the Bake igniter. If you find the igniter not glowing, it's likely bad. If you look up at the ceiling inside the oven cavity, you will see the Broil burner and the Broil igniter. The Broil igniter and the Bake igniter are both the same part numbers so you could remove the Broil igniter and swap it with the Bake igniter.

NOTE: Disconnect the power from the range before servicing the range.

I recommend calling a service technician to diagnose and repair your range.

Read More
Joey S -
Sears Technician
Q:

Maytag stove Model #CRG9700CAM is buzzing.

A:

Thank you for your question and I understand your concern.

Providing the buzzing sound does not start when the fluorescent light is turned on; the clock/oven control is the only other item that can produce the annoying buzzing sound.

You can look up and order the clock/oven control at Sears PartsDirect

Read More
Joey S -
Sears Technician
August 24, 2011

Top Parts