Model #CDX-705 SONY compact disc

  • No Image Available - Fidelitone
    3 Results

Question and Answers


Pro-Form 705 treadmill ground wire problem


Thank you for your question.

I am sorry you are having a problem with the ground wire on the console. It looks like this ground wire is the ground for just the console and should be connected. If the ground wire for the console was not visible, I recommend opening the console to see if it was just not routed through the hole. If you find the wire route it correctly through the hole and reassemble. If you are unable to find wire, I recommend calling to have one sent to you. I am not sure if this wire connects to the console board or is part of the console. The folks on the phone will be able to send you the part needed. The phone number to call should be located on the back of the manual.

Please let me know if you need further assistance on this problem.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 30, 2011

Exercise bike locked


Thank you for your question on the exercise bike pedals locked.

It could be a number of things that can cause this.

I would suggest that you remove the left pedal and then the side cover.

Then see if you can roll the drive belt off the pulley.

Then check the fiction belt on the fly wheel to make sure it is loose on the flywheel.

When you have done this then you will be able to tell if the bearings are seized on the crank pedal or if the fly wheel bearings a seized.

Please let me know what you find and with that information we can continue troubleshooting.

Sam A.

Read More
Sam A -
Sears Technician
April 02, 2012

On Model 790 705 02013 (Kenmore Gas Range) - we have the conversion kit but need to know which orifice goes to which surface burners.


A qualified installer should complete that LP conversion.

The right front burner will use the orifice that is marked 1.02mm and has a yellow marking. The white marked orifices that are .93mm will be used on the other 3 burners.

If you need more help, let us know.

You can contact your local gas supplier if you need a qualified installer. You may also be able to find a pre-screened service provider on the website.

Read More
Lyle W -
Sears Technician
April 13, 2012