Model #C950-52318-3 CRAFTSMAN Snowthrower, Gas

  • Handle Assembly
    3 Results
  • Wheel Assembly
    3 Results
  • Auger Housing Assembly
    3 Results
  • Impeller Shaft Assembly
    3 Results
Find part by diagram >

Question and Answers


I have a Craftsman II snowblower 8hp/27". It starts great but runs rough. I have cleaned the carb.


I think the problem is in the carburetor. To clean the air and fuel passages of the carburetor, you need to run a soft wire through each passage, spray some carburetor cleaner through the passages, then blow each passage out with compressed air.

If you have already done this, I recommend replacing the carburetor.

Read More
Jimmy K -
Sears Technician
October 26, 2009