Model #C50XCRE1N006 KENMORE Attachments (Vacuum)

  • Power-mate
    3 Results
Find part by diagram >

Question and Answers


Vacuum canister model 5505 rug attachment does not rotate. What is the issue? Model 116 part no.C50XCRE1N006


Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore vacuum.  

From the information you have provided above, it seems to me like the belt may have come loose or broken off,. The Belt is connected to the motor that runs to the brush. I would see check for this to get the vacuum back up and going.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
January 19, 2015

Power mate running intermitently. C50XCRE1N006 Kenmore Power-mate


Thank you for choosing Sears Parts Direct. I will be more than happy to help with your power mate. Upon researching model C50XCRE1N006, you would have to open it up to see which wires are loose or damaged.

If you have any further questions please re-post. Thank you for choosing Sears Parts Direct. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
September 30, 2014

Canister Kenmore Vacuum Power-Mate will not keep running?


A vacuum is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
aashe -
December 28, 2011

Thank you for your question as to which part to replace.

If you have check the connector at the bottom of the wand as it connects to the power mate connector on the swivel and it shows arcing or blackening of the contacts that may be the issue and you would need to replace the Extension wand tool and the wire harness in the swivel assembly.

I would first suggest taking the Extension wand apart first to see if the ribbon connector contacts are the problem.

You will need to locate the two plastic clips on the plastic channel on the back of the extension wand and pull them out. Then you can slide the channel to release the lock on the channel and gain access to the inside ribbon and contact cover connection at the top. This connector is replaceable. The image below may help you with this.

The part number for the link cover at the top of the extension wand is: 8191872.

Part number for the link and cover .

Sam A.

Read More
Sam A -
Sears Technician
December 29, 2011
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show