Model #ARGS7650SS-P1130766NSS AMANA Slide-In Range, Gas

  • Miscellaeous Information
    3 Results
  • Cabinet
    3 Results
  • Cavity
    3 Results
  • Main Top
    3 Results
  • Control Panel And Gas Supply
    3 Results
  • Oven Door & Storage Drawer
    3 Results
Find part by diagram >

Question and Answers

Q:

Controler for Amana ARGS7650SS

A:

Thank you for your question and I understand your concern.

Maintop Removal–Slide-In:

  1. Turn off electrical power and gas to the range.
  2. Disconnect gas and power from unit.
  3. Remove screws securing top surface burners.
  4. Remove surface burner and disconnect spark ignitor wire from surface burner.
  5. Raise and remove maintop from unit.

Control Panel Disassembly–Slide-In:

  1. Turn off electrical power and gas to the range.
  2. See "Maintop Removal–Slide-In" for removal.
  3. Carefully pull surface burner knobs outward to remove.
  4. Remove screws located on front of control panel.
  5. Remove screws securing end caps to unit.
  6. Remove screws securing control panel to unit.
  7. Pull control panel forward and tilt downward.
  8. Remove screws securing ERC to control panel.
  9. Depress side locking arms, push forward on oven light switch, and disconnect wire terminals from switch.
  10. Replace and reassemble in reverse order.

ERC–Slide-In:

  1. Remove control panel, see "Control Panel Removal– Slide-In" procedure, (steps 1-6).
  2. Remove screws securing ERC to control panel.
  3. Disconnect wires from ERC.
  4. Replace and reassemble in reverse order.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
February 03, 2012