Model #AO-27SB-P85547-7S AMANA built-in oven, electric

  • Glass Door
    3 Results
  • Door Latch Assembly
    3 Results
  • Cabinet Section Single Oven (ao-27sb/p85547-3s) (ao-27sb/p85547-5s)
    3 Results
  • Cabinet Section Double Oven (ao-27db/p85547-4s) (ao-27db/p85547-6s) (ao-27db/p85547-8s)
    3 Results
  • Control Panel Section
    3 Results
  • Control Compartment Section
    3 Results
  • Oven Accessories (ao-27sb/p85547-3s) (ao-27db/p85547-4s) (ao-27sb/p85547-5s) (ao-27db/p85547-6s) (ao-27db/p85547-8s)
    3 Results
  • Control Panel Section (ao-27sb/p85547-7s)
    3 Results

Question and Answers

Q:

Head rebuild Air compressor #919155731

A:

Thank you for your question on the air compressor rebuilt.

I believe you should have gotten a head and reed valve plate and some gaskets. This should be all you need to update the head and reed plate assembly repair.

You should not need the flat head gasket or the round O-ring for the cylinder.

Sam A.

Read More
Sam A -
Sears Technician
August 08, 2012
Q:

Why does my microwave keypad keep inadvertently entering 7777 and locking up?

A:

Without a model number, I am not able to see the type of control that your Kenmore Spacesaver microwave has. There are many different models of this microwave. Your failure is likely in the membrane keypad. Because this this an internal component failure, I recommend having a service technician diagnose and repair this problem. Microwaves are inherently dangerous to service. Internal capacitors can retain a lethal electrical charge even then the unit is completely unplugged. A microwave radiation leakage test must be performed on the unit following any internal repair. These are the reasons that the unit must be serviced by a technician.

Read More
Lyle W -
Sears Technician
April 24, 2009
Q:

craftsman compressor

A:

Thank you for your question on the wiring positions on the GE motor.

There should be a motor number on the side of the motor on a sticker. It should start with a MOXXXX number.

I will send you the one for GE motors that I have.

It should work for most GE air compressor motors.

If it is not right then please reply with the motor number and I will try to get some information on the motor wiring.

Sam A.

Read More
Sam A -
Sears Technician
October 17, 2012