Model #AAC34-OTR APOLLO Microwave/Hood Combo

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

OTR Microwave Installation Instructions

A:

Here is a link for the installation guide on that model (401.88523): Installation Instructions . Page 7 of that manual has the cabinet measurements.

This should be the information that your cabinet builder needs. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
May 26, 2011
Q:

Cfm for my otr microwave

A:

The fan on that microwave is rated at 220 CFM.

Read More
Lyle W -
Sears Technician
June 23, 2011
Q:

How do I remove an Amana OTR Microwave with vent?

A:

The general procedure for removing an Amana microwave involves these steps:

  • Unplug the microwave to disconnect electrical power.
  • Disconnect the venting if the microwave vents through the roof.
  • Remove any screws that secure the damper to the upper cabinet (if installed with roof venting and screws are present).
  • Carefully support the bottom of the microwave while removing the bolts that hold the microwave to the upper cabinet. NOTE: This process normally requires 2 people. The microwave will be heavy.
  • Tilt the microwave down in front and then lift it off of the rear mounting plate.
  • Remove the rear mounting plate from the wall behind the microwave.

Here is a link for an installation guide for an Amana OTR microwave hood combination: Installation Instructions . Depending on your model, you may be able to reverse the installation procedure in this guide to remove the microwave.

If you need more help, resubmit your question with additional details and the full model number of your Amana microwave.

Read More
Lyle W -
Sears Technician
March 09, 2010