Model #9400 Weber grill, gas

  • Summit 475 Insulated Sleeve
    3 Results

Question and Answers

Q:

I have a Bissell ProHeat 2X cleaner, the rollers stopped turning when turned on, but they are not locked up?

A:

There is a micro switch on the rear of the brush housing that will turn the brush motor off if the housing is not properly installed.

Remove and reinstall the brush housing making sure the switch plunger is depressed.

Read More
Jimmy K -
Sears Technician
November 06, 2009
Q:

Bissell ProHeat 2X cleaner, the rollers stopped turning when turned on, but they are not locked up. Why?

A:

There is a micro switch on the rear of the brush housing that will turn the brush motor off if the housing is not properly installed.

Remove and reinstall the brush housing making sure the switch plunger is depressed.

Read More
Jimmy K -
Sears Technician
November 06, 2009
Q:

oven won't work

A:

Hello Teresa. I am sorry to hear about that problem that you are having with your Kenmore range. 

 

Your symptoms point to a failure in the electronic oven control board. You may also have a broken bake or broil element that caused that control board problem. I recommend that you unplug the range and physically examine the bake and broil element. 

 

If one of those elements is broken and needs to be replaced, you can order the part from this page: Kenmore Range Repair Parts.  Use the full model number of your range to access the correct parts listing. Unplug the range before accessing internal components and replacing parts.

 

I recommend that you also check the back of the electronic control board for damage whether you found a problem with the oven elements or not. You can remove the upper back panel behind the console to access the control board (with the range still unplugged). Look for a burnt spot or burned wires on that control board. Based on the "pop" that you heard, you will probably find a damaged control board. You can order that control board from the same link that I provided above. You will normally need to order the overlay that covers and marks the selection buttons when ordering that control board. 

 

These tips should help you fix that range problem. If you need more assistance, reply with additional details.

 

If you get to the point where you need to have a service technician examine and repair the range, you can schedule service through this link: Sears Home Services Range Repair.

 

Read More
Lyle W -
Sears Technician
April 23, 2013