Model #930-027 Peerless transaxle/transmission, tractor

  • Replacement Parts
    3 Results

Question and Answers

Q:

Attachment for drive control system for self propelled mower model #917 371 930/

A:

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 10, 2011
Q:

How do I install a lift switch on my treadmill?

A:

The switch plugs into the console and has spring retainers to hold it in place. Look at the new switch and see where the retainers are.

Disconnect the power to the treadmill, use a small screwdriver or a putty knife to pry the old switch out of the console.

Remove the wires from the old switch and install them on the new switch. Push the new switch into the opening in the console until it snaps in place.

Read More
Jimmy K -
Sears Technician
November 06, 2009
Q:

how to fix my washing machine

A:

Thank you for your question and I understand your concern.

If you are wanting to access and replace the door lock assembly, you do not have to take the front panel off.

I added three images below to reference. The first image shows how to access and remove the door lock assembly. The second and third images shows how to diagnose a failure code if the 5 indicator lights and the start light are flashing and pausing.

The control signals the failure code by flashing the five indicator lights of Door Lock, Wash, Rinse, Final Spin and Control for the first number or letter after the E and the Start indicator light for the second number or letter after the E. When a failure occurs, the washer stops or pauses and the control beeps and flashes the five indicator lights indicate a failure as occured. 

NOTE: Disconnect the power cord from the power source before servicing. 

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
November 20, 2013