Model #9-29013 (GUARD KIT) Craftsman saw radial accessory

  • Figure 1
    3 Results
  • Figure 2 - Guard
    3 Results

Question and Answers

Q:

Is the jointer blade guard supposed to spring back?

A:

Thank you for your question.

I am sorry you are having a problem with the blade guard on the jointer. The guard should spring back to cover the blade if you are not feeding a piece through. I have posted the instructions for checking the spring below. The instructions state to refer to figure 20. Figure 20 is the parts break down. If the spring is broken, I recommend calling the service number on the back of the manual to find out how to obtain a replacement spring. Chances are the blade guard needs to be adjusted.

Please let me know if you need further assistance on the jointer.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
April 14, 2011
Q:

How do I add a blade guard to a Craftsman edger Model #536796536

A:

That blade guard is shown as Key 42 in the parts image that I provided below. It should attach to the quill assembly (Key 57). All of the holes in that blade guard may not be needed on your edger. You may only have two holes that will line up with the bolts on the quill assembly to attach it. If you need more help, send us some digital pictures of the part and the quill assembly on your edger.

Read More
Lyle W -
Sears Technician
June 11, 2011
Q:

wrinkle guard

A:

Thank you for your question and I understand your concern.

The "Wrinkle Guard" is used to help smooth out wrinkles that may form when the clothes are not removed promptly at the end of the cycle. The "Wrinkle Guard" will tumble without heat for 40 minutes unless you open the door.

You will not likely have to rewash the uniforms but you may need to use a spray bottle with water to mist and dampen the uniforms first before using the "Wrinkle Guard".

Read More
Joey S -
Sears Technician
March 30, 2012