Model #9270 FRIGIDAIRE countertop microwave

  • Tappan Microwave/control Panel
    3 Results
  • Tappan Microwave/door
    3 Results
  • Basic Body
    3 Results
  • Basic Body Page 2
    3 Results
  • Power Control
    3 Results

Question and Answers

Q:

The center ring on the front right burner is out.

A:

See if the "element on" light illuminates when that burner is turned on in either direction. If that "element on" light does illuminate then you probably have a bad element since that circuit is probably getting power. If that "element on" light does not illuminate when that burner is turned on then you will probably need to replace the infinite burner switch in the console. This test is not foolproof but it will normally indicate which component needs to be replaced in your situation. If you are confident that you have determined which part needs to be replaced, then you can order the replacement part from this page: Kenmore Electric Range Model 790.9270 . . . Parts . Be sure that you unplug the range before accessing and replacing internal components. Here is a link for a video that shows how to replace a burner switch in that type of range: Range Infinite Burner Switch Replacement . Here is a video that shows how to replace an element: Radiant Element Replacement .

If you need more help, reply with additional details and the full model number of your Kenmore range.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 12, 2012
Q:

Is there a free safety guard upgrade for saw model 113.19771?

A:

Our records do not indicate a free upgrade for the safety guard for your saw. A guard kit was produced and sold and installed when applicable, it was not free and was fairly expensive.

The guard kits are out of stock and no longer available for ordering.

Read More
Jimmy K -
Sears Technician
August 19, 2009