Model #9210-TY2 Black & Decker mixer- hand

  • Replacement Parts
    3 Results

Question and Answers

Q:

My oven is taking a long time to preheat

A:

That link for a previous answer that Marc H. posted in the above response has some good information that applies to your situation. According to those numbers that you provided, this range has an oven with a hidden bake element. That type of oven will take longer to preheat that the ovens with an exposed bake element. If the oven takes about 30 minutes to preheat and then properly maintains the set temperature, this indicates that you probably don't have a component failure in the range.

Check that broil element to see if it is heating properly in the broil mode. If that broil element is bad, it could be causing this heating problem.

A failure of the bake element or the clock control board in the console could also prevent the oven from heating properly.

I hope that this information helps. If you need more assistance, reply with additional details and the full model number of your range. That exact model number should be on a sticker in front of the right or left front leveling leg. Open the bottom drawer to view that area.

If you get to the point where you need to have a service technician examine and repair the range, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
June 28, 2012
Q:

Parts diagram for grinder

A:

Thank you for your question.

I am sorry you are having a problem getting the correct part. I called the manufacture and they state the correct part number for the gear kit is 5140046-43. You can order the part from our parts website: Sears Parts Direct .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
July 19, 2011