Model #920-002 Peerless transaxle/transmission, tractor

  • Replacement Parts
    3 Results

Question and Answers

Q:

F7 display on oven - operation shut down - how do i set so can continue cooking.

A:

Thank you for your question.

I can understand wanting you oven to work. It makes it hard to cook different types of meals.

Since I did not see your model number listed for your range I would suggest you look at what the first responder linked you to for the Jimmy K answer to see if your range is one of these models with the F7 code.

If you will respond through the link with the model number I will be glad to help further.

If this is a free standing range the model number is usually behind the storage drawer panel on the lower body of the frame.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
December 18, 2010
Q:

Singer Futura II 920...Where can I find the accessory kit and optional feet for it?

A:

Thank you for you inquiry.

The accessories that came with your Singer Futura II 920 sewing machine are no longer available as a complete set.

  • There are about 30 different accessory pieces still available as individual purchases from your local Singer Sewing Center, if you know what you are looking for. I would suggest looking in your local yellow pages for your local dealer and ask him to show you what is available.
  • You may also look on the Web by searching for Singer Futura II 920 accessories. You may find someone who is either selling the complete machine or just selling the accessories.
I hope this helps.

Read More
Sam A -
Sears Technician
July 28, 2010
Q:

Singer Futura II model 920...How do i change the outer belt and where can I get a new one?

A:

Thank you for your question on the Singer Furtura II 920. There are a couple different versions of the this model and I will need to know if the belt you are referring to is a belt that goes directly from the motor to the hand-wheel or if the is a idler cogged pulley and looks like is has a bent elbow pattern.

Please let me know the model you have.

Sam A.

Read More
Sam A -
Sears Technician
April 07, 2012
A:

Thank you Sandy, for the update on the sewing machine. Does the motor make any noise when you push the foot pedal? If the motor runs but the drive wont move then I would think it is the belts of stretched belts that could be adjusted. If the motor does not run when you push the foot control it will require diagnosing whether it is the foot control or the motor or some electrical problem in the wire harness. Please give me a little more detail so we can find the root of the problem. Sam A.

Read More
Sam A -
Sears Technician
April 09, 2012
See more answers