Model #919329110 Craftsman generator

  • Cabinet Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Cabinet Parts
    3 Results

Question and Answers

Q:

need wireing schematics for a campanion modle # 919329110

A:

Thank you for your question on the wiring schematic for the Sears Companion 5500 watt generator.

I have given you an image below for the wiring diagram for the generator.

Sam A.

Read More
Sam A -
Sears Technician
October 08, 2012
Q:

Generator Craftsman model 919329110, how to separate armature shaft from engine crank.

A:

Thank you for your question.

I can understand wanting to know why you are not able to remove the rotor from the engine crankshaft.

Sometimes under the right conditions it can be a problem.

I am going to assume that you have loosened the long bolt 3 or 4 turns that secures the rotor to the engine shaft.

It sounds like this one may be tighter that most.

Remove all of the back end and the field windings if you can and with gloved hands hold the rotor and motor above a surface just a couple of inches and have someone give the long center bolt one good hard hit and by using the weight of the motor suspended it should help separate the two pieces.

Be very careful in supporting the rotor and and engine, and do not miss with the hammer on the center bolt, you do not want to hit or glance off the bolt and hit anything else.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 20, 2011