Model #919166600 Craftsman air compressor

  • Air Compressor
    3 Results
  • Compressor Pump
    3 Results

Question and Answers

Q:

Replacing pistons in 919-166600 compressor 919-166600

A:

We do not have a service manual on this oiless twin cylinder compressor. 

The piston connecting rod is clamped over the ecentric pin on the single cylinder but I can't be certain how the inner piston is fastened to the eccentric pin. On the single cylineder compressor, you loosen the screw clamping the connecting rod to the eccentric pin/bering and pull the connecting rod off the eccentric pin/bearing. Remove the head and valve plate and push the piston up and out of the cylinder sleeve. I don't believe you have to remove the eccentric pin to remove the inner piston but if you do, look for a allen head set screw(s) securing the eccentric pin to the motor shaft. Loose the set screw(s) and pull the eccentric pin off the motor shaft.

Read More
Joey S -
Sears Technician
April 15, 2015
Q:

919-166600 compressor parts question

A:

Thank you for your question.

I can understand not wanting to purchase the $25.00 washer.

If you have the old that is not damaged it should take up the space between the two rods.

I have done a pricing inquiry on that spacer washer to see if it was priced wrong. I hope so, or it is a very special washer.

If you do not have the old spacer washer I do not know think you can use anything else to accomplish the proper spacing for the rod set.

Please reply if you need more help or if you do not have the old spacer washer to use and I will do what I can to help you.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
May 25, 2011
Q:

model 919166600 compressor work with V220 or V110

A:

Thank you for your question.

I have checked the model number you have submitted and this model is a 240-volt unit.

Please reply below if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 12, 2011