Model #919150380 CRAFTSMAN Air compressor

  • Air Compressor
    3 Results
  • Compressor Pump
    3 Results
Find part by diagram >

Question and Answers


I must replace the intake muffler (CAC-1046) on a Sear Air Compressor (919.150380) pump. Do I have to remove the Head and replace the Gasket?


I'm sorry that you are having some difficulties on this repair. is a great place to get help. I did some research and found a similar question that an expert has answered. I have attached the link below. I hope this will assist you until your expert can respond..

Read More
James -
December 15, 2010

Thank you for your question.

I can understand not wanting to take off anymore than you have to, to install the intake.

  • Yes you will need to loosen the head bolts.

  • You may be able to carefully get the top head up just enough to slip out the old piece and install the new one without disturbing the reed plates.

  • When you loosen the bolts take a sharp blade to carefully pry between the top head cover and the gasket without damage to the gasket.

  • Then when you tighten the head bolt they need 7 to 10 foot pounds of torque.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
December 16, 2010

Thanks for you help.

Read More
frank108 -
December 17, 2010
See more answers

Top Parts