Model #917376741 Craftsman walk behind lawnmower, gas

Question and Answers

Q:

917376741

A:

Thank you for your question.



I will be happy to assist you with replacing the drive belt on your tractor. First disconnect the spark plug wire from the spark plug. Then remove the front cover over the belt and clean out any debris. Next, tip the mower onto its side with the air filter up. With gloved hands, remove the blade and adapter. Then remove the bottom belt cover and roll the belt off the pulley. To install the belt, just place the belt on one pulley, and walk it on the other. Once the belt is on reassemble the mower in the reverse order. The image below also includes the instructions. Click on the image to enlarge it.
I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 23, 2012
A:

Thank you for your question.



I will be happy to assist you with replacing the drive belt on your tractor. First disconnect the spark plug wire from the spark plug. Then remove the front cover over the belt and clean out any debris. Next, tip the mower onto its side with the air filter up. With gloved hands, remove the blade and adapter. Then remove the bottom belt cover and roll the belt off the pulley. To install the belt, just place the belt on one pulley, and walk it on the other. Once the belt is on reassemble the mower in the reverse order. The image below also includes the instructions. Click on the image to enlarge it.
I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 23, 2012
See more answers
Q:

Ask your own question or join this conversation how do I chang the battery

A:

The battery is mounted in a battery box that is attached to the back of the trim plate on the handle of the mower.

To access the battery, remove the 5/16 head screw that mounts the battery box to the trim plate. The battery box will drop down on the end the screw is holding and you can pull the battery box in the direction of the screw hole. Pull the battery box about 1 inch and the tab on the opposite end will release from the trim plate.

Lift the battery out of the battery box.

Read More
Jimmy K -
Sears Technician
June 14, 2010
Q:

push mower, model 917376741 need drive cable part 407816

A:

Thank you for your question.

I will be happy to assist you. I looked up the model number you submitted. The correct part number for the drive cable is 407816 and can be ordered from the following link. Craftsman parts . The image on the website is wrong. I sent them some feedback telling them the image is wrong. They should have that fixed shortly. The cable you receive will be the same as you have. I am sorry for the confusion.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage My Life!

Mark T.

Read More
Mark T -
Sears Technician
October 02, 2012