Model #917376732 Craftsman walk behind lawnmower, gas

Question and Answers

Q:

replace drive cable on lawnmower model 917376732

A:

Thank you your question.

The cable might not come with the instructions for installation. I should be able to explain the instructions to you.

  • Remove the cable from the bail arm on the handle.
  • Remove the bolt securing the cable housing to the handle.
  • Remove the spark plug wire.
  • Remove the belt cover on the front of the mower.
  • Tip the mower onto its side so the oil fill tube is down. This makes it easier to see where the cable connects.
  • Unhook the cable end from the transmission.
  • Use a pair of pliers to squeeze the cable clip from the bottom to remove the cable housing from the mower housing.
  • Route the cable in the same direction and reverse these steps to connect the cable.
  • Make sure to secure the cable to the handle with wire ties if needed.



I hope these instructions are helpful.

Please feel free to reply below if you need further assistance. Thank you for using Manage my life.

Read More
Mark T -
Sears Technician
June 20, 2012
Q:

model 917376732 mower where does drive cable spring end attach to-pictures please

A:

Thank you for your question as to where the drive cable attaches to the transmission.

I will give you some pictures and I hope that will help.

Please let me know if that helped you.

Sam A.

Read More
Sam A -
Sears Technician
May 04, 2012
Q:

I have a Craftsman Mower, model 917376732. I am looking for a diagram showing how to connect the drive control cable.

A:

I am sending you some images showing the proper connection for the drive control cable to the gearbox. I hope this helps.

Read More
Jimmy K -
Sears Technician
April 16, 2010

Recommended maintenance parts & accessories

Show 3 more
No more item to show