Model #917255736 CRAFTSMAN Lawn, Tractor

  • Electrical
    3 Results
  • Enclosure
    3 Results
  • Drive
    3 Results
  • Steering And Front Axle
    3 Results
  • Lift Adjustment
    3 Results
  • Mower Lift Bracket And List Link Replacement Kit 110095x
    3 Results
  • 38" Mower
    3 Results
Find part by diagram >

Question and Answers

Q:

What is the cylinder compression for a Sears riding lawn mower-model number-917255736 917255736

A:

Thank you for your question and I understand your concern.

The compression range should be between 80 -110 lbs. 

I hope this is helpful

Read More
Joey S -
Sears Technician
May 05, 2014
Q:

Need a new Bagger shoot

A:

Managemylife.com experts can help you determine if the bagger on the Craftsman tractor is repairable or needs replacement. Please provide the model number to the bagger attachment, also to get the best possible answer. Expert response may take two business days.

Read More
Anna T -
November 11, 2012
A:

Thank you for your question.

I am sorry you are having a problem finding the chute. The model number you submitted is the tractor model number. The bagger should have its own model number. Usually the model number tags are located on the frame of the bagger where it mounts to the tractor. The model number should start with 917.*****. Once you have that number we should be able to find the part number. Then find out if it is available.



I hope to hear from you.

Thank you for using Manage My Life!

Mark T.

Read More
Mark T -
Sears Technician
November 12, 2012
See more answers
Q:

Looking for a Craftsman Lawn Tractor repair manual.

A:

It's great that you want to repair your tractor yourself. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
September 27, 2012
A:

Finding manuals can be difficult after ten years. Service manuals are even harder to find. I was able to locate a manual for a similar model. There is very little difference. You can view by clicking here; Manual .

The parts diagram is available for your tractor model and you can view here; Sears Parts Direct .

I was not able to locate a service manual for this tractor. If there is a specific issue and you add more detail, we will be happy to assist. Please advise if more information is needed. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
September 27, 2012
A:

Barbara H...your response refers to manual 917255732 is it interchangeable with manual 917255736 that I requested? Thanks

Read More
Anonymous -
September 27, 2012
A:

It is not exactly interchangeable, but will work for service, repairs, and other information. Both are 11 H.P. 38" with the same type engine. Use the parts diagrams and parts list for your model number at the Sears Parts Direct link if replacement parts are needed. Otherwise this manual should work well.

Read More
Barbara H. -
Sears Technician
September 29, 2012
See more answers
Q:

Where can I find pictures of American Yard Products part numbers 532153805, and 123783x014? They are the blade saddles for a Craftsman Garden Tractor 917.

A:

Please allow 24 to 48 hours for an expert to response to your question! Have a nice day!

Read More
Dezeray -
April 24, 2012
A:

Thanks for contacting ManageMyLife.com. I understand your concern with wanting pictures of 2 parts. We are here to help. The saddle number 532153805 has been substituted to 145208X013. The picture is on the first image. Look at key number 6. The second part number is for a saddle on a zero turn tractor. On the second image look at key number 30. I hope this helps.

To order parts please visit SearsPartsDirect.com with the model number.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
April 25, 2012
A:

I have seen these drawings before. These are the wrong parts. The parts I am looking for are the two saddles that hold the blades in a 90 degree angle. I have purchased them in the past from Sears under the part number 85893 and 105664X. I talked to a lady at Sears who told me these parts were changed to the numbers above but they are wrong as you can see on the diagrams above. What are the proper part numbers and where can I get them? Thanks

Read More
Ray -
April 26, 2012
A:

Ray, The part number 105664x is available thru Sears Parts Direct. The part is called a support saddle front. The support saddle rear is no longer available. The new part number is 105663X .

Read More
John H -
Sears Technician
May 01, 2012
A:

John, Those part numbers are for the axle saddle not the blade saddles. I have attached a couple pictures of what I need. Thanks.

Read More
Ray -
May 02, 2012
A:

Ray, The manufacture is only sell the saddle with the complete jack shaft. The part number is 121687X. The picture on Sears Parts Direct website show it on the bottom of the jack shaft.

Read More
John H -
Sears Technician
May 05, 2012
A:

John, Thanks for your help but I have to profess my ignorance. What is a "jack Shaft". I have been scouring both the tractor and bagger manual without any success in finding it or the part number 121687X for the blade saddles. Can you give me some more direction. Thanks

Read More
Ray -
May 07, 2012
A:

John, just found out what the jack shaft is. the bracket on the bottom has 2 other pieces that mate with it to hold the blades at a 90 degree angle. They all nest together with the blades on the screw that goes into the jack shaft. This is getting silly. They shouldn't be this hard to find. Thank You

Read More
Ray -
May 07, 2012
See more answers
Q:

I keep getting oops for model #917.255736 I get the parts page but when I go to the manual oops

A:

I know how important it is to have as much useful information about your appliance as possible so that it is easier to find replacement parts and part numbers. While you are waiting for an expert answer, I did manage to find a link in where you can enter your model number and the owners manual from the Manage My Life website. Hope this helps!

Read More
Priscilla V -
December 07, 2011
A:

Thank You Maestro. The 917.255732 seems to be the same as 917.255736

Read More
Anonymous -
December 07, 2011
A:

We do not have a copy of the manual for your exact model. We do have one for the model ending in "2", which is very similar to your model. The only difference between the tractors was likely a seat/color combination or an added feature on one or the other.

You can CLICK HERE to see the manual that we do have and I believe it will work for your model.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
December 07, 2011
A:

Thank You Wade. I went to the previous E-Mail and got that number. Maybe we will get this manual and have it in the data base. Again, thank you with the info.

Read More
Anonymous -
December 07, 2011
See more answers
Q:

Can I install a 42" snow plow on my Craftsman tractor model 917.255736?

A:

This model does not have a snow plow attachment listed for it. It is too small for a snow plow blade.

Read More
Lyle W -
Sears Technician
October 19, 2009
Q:

How to replace a drive clutch belt on a Craftsman 38 inch model 917255736?

A:

I am sending you an image of the instructions for replacing the deck belt and removing the deck if it becomes necessary to do so.

Read More
Jimmy K -
Sears Technician
July 20, 2009

Top Parts