Model #9119398710 Kenmore free standing, electric

  • Backguard Section
    3 Results
  • Main Top Section
    3 Results
  • Body Section
    3 Results
  • Power Lock Section
    3 Results
  • Oven Door Section
    3 Results
  • Wire Harnesses And Components
    3 Results
  • Optional Porcelain Pan And Chrome Ring Kit No. 8068410
    3 Results

Question and Answers

Q:

I have a freestanding Kenmore Limited Edition electric range. Model # 9119398710, it is beeping and showing F-3. I don't know what to do

A:

The F3 code on this range indicates that you have a problem in the oven temperature sensor circuit. The sensor will normally need to be replaced to fix this type of problem. There is a slight chance that a wire harness problem or a control board failure is causing this code.

If you want to try to fix this failure yourself, I recommend that you replace the oven temperature sensor probe. The part number for the probe is WB21X5301. You can order this part from the Sears PartsDirect website.

Unplug the range before you access this component. The procedure accessing this sensor is shown in the image below. You may need to connect your new sensor with ceramic wire nuts instead using a wire harness disconnect plug.

If you need more help, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
October 27, 2010
A:

I tried to find the manual for this range online or even in hard copy. The Sears PartsDirect website does not have this manual in hard copy. It is no longer available. I did not find an online copy in our database. Sorry that I can't help you with the manual.

Read More
Lyle W -
Sears Technician
October 27, 2010
See more answers
Q:

Ordered incorrect part for stove. Need someone to speak with to assist in ordering correct part to get oven working again. In the past part worked but not now

A:

You indicate that you already replaced the clock control. I should be able to help you diagnose and repair this failure on your own but I will need some more details. You indicate that the oven is nor working properly. Is it not heating at all? Is it heating to the incorrect temperature? Do you see any error codes on the display of the control?

See if the oven will work in the broil mode if it is not working in the bake mode.

Since you already replaced the clock/control, here are some tips on checking the other components in that oven:

If you have a volt/ohm meter, you can unplug the range and check the resistance of the oven temperature sensor probe using that tool. The sensor should measure around 1100 ohms of resistance at room temperature (around 75 degrees). Here is a link for a video that shows how to test that component: Video: Oven Sensor Testing . If that sensor is okay, you can check the elements. Here is a video that shows how to check those elements: Video: Bake Broil Heating Element Part Testing . The bake element should measure around 16 ohms and the broil element should measure around 22 ohms in this range. Be sure that you unplug the range before accessing internal components.

These tips may help you with this range failure. Reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
May 29, 2011