Model #9117198710 KENMORE Range (gas)

  • Backguard Section
    3 Results
  • Main Top Section
    3 Results
  • Burner Section
    3 Results
  • Body Section
    3 Results
  • Oven Door Section
    3 Results
  • Wire Harnesses And Components
    3 Results
Find part by diagram >

Question and Answers


How do you clean the igniter?


Your details indicate I believe is that one surface burner will not ignite off the spark igniter but will light with match. With this said the spark igniter must be working or the other surface burner that shares the same spark igniter would not ignite.

The likely failure is the small pilot holes on the side of the burner in front of the flash tube are stopped up.

Lift the top open to gain access to the burners if needed. Get a regular size paper clip and straighten it out to use and clean out the holes facing the flash tube. If gas is not directed up into and through the flash tube the gas will not ignite from the sparking electrode/igniter and flash back to the burner in order to ignite.

If this is not your symptom resubmit your question with the model number and additional details.

Read More
Joey S -
Sears Technician
March 11, 2009

Top Parts