Model #91149013992 Kenmore Elite built-in oven, electric

  • Control Section
    3 Results
  • Wiring Components
    3 Results
  • Center Space Section
    3 Results
  • Upper Body
    3 Results
  • Convection Fan
    3 Results
  • Lower Body
    3 Results
  • Door Lock
    3 Results
  • Door
    3 Results

Question and Answers

Q:

How to wire the

A:

The COM0 and COM1 connections on the new control board equate to the C and COM0 connections on the old control board. Those the black L1 wire will connect to the COM0 and the COM1 connections on the new control board. Since they have a common L1 connection that is piggybacked across the control board it does not really matter the order in which they are connected as long as the COM0 and the COM1 on the new board both have the black L1 wire attached. I highlighted those connections and the other L1 black wire connections in the first image below. Hopefully, that will help you connect those wires correctly.

That control board kit should have come with the instructions that are shown in the next 4 images. Those instructions cover several different models so you do not have to use all of those instructions. You may need to review the instructions that apply to your model.

I hope that this information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
September 05, 2012
A:

Here are the additional 2 pages of the instructions for that control board replacement.

Read More
Lyle W -
Sears Technician
September 05, 2012
See more answers
Q:

How to transfer wires from Robertshow ERC (#WB27T10140) Kenmore double oven controller to Sanyo/Torisan ERC3DD WB27T10287

A:

The COM0 and COM1 connections on the new control board equate to the C and COM0 connections on the old control board. Those the black L1 wire will connect to the COM0 and the COM1 connections on the new control board. Since they have a common L1 connection that is piggybacked across the control board it does not really matter the order in which they are connected as long as the COM0 and the COM1 on the new board both have the black L1 wire attached. I highlighted those connections and the other L1 black wire connections in the first image below. Hopefully, that will help you connect those wires correctly.

That control board kit should have come with the instructions that are shown in the next 4 images. Those instructions cover several different models so you do not have to use all of those instructions. You may need to review the instructions that apply to your model.

I hope that this information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
September 05, 2012
A:

Here are the additional 2 pages of instructions for that control board replacement.

Read More
Lyle W -
Sears Technician
September 05, 2012
See more answers

Top Parts