Model #91148385992 KENMORE Built-In Oven, Electric

  • Control
    3 Results
  • Door Lock
    3 Results
  • Body
    3 Results
  • Upper Door
    3 Results
  • Lower Door
    3 Results
  • Opt. Filler Trim Kit-404759/4047990
    3 Results
  • Wire Harnesses/wiring Components
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


I have a Kenmore double oven built in is showing FO beside the digital clock. What is wrong?


Thank you for choosing and allowing us to help you. I know it has to be very frustrating to be dealing with a major appliance that is now compromised.

The F0 error code indicates that you have a problem with the OFF key on your control panel or that you have a failure in the electronic oven control board.  I want to share that the parts that will probably be required to repair this electric range will be expensive. It will likely need a new control panel assembly which includes the key pad. That part alone will cost $300.17. This range that was manufactured by Roper in 2001. It is aproximately 12 years old. The average life expectancy for an electric range is 13 years. You may want to consider replacing rather than investing in a product of this age that may have other parts that may be ready to fail in the near future. Click here to view what high efficient units that are available at If you do decide to repair this product I would recommend having a qualified technician perform the service and verify the correct replacement parts that will be required for the repair. Click here to view the website to view your product and the cost of those parts.

You can have the elelctric range repaired at your home by a Sears technician. Click here to schedule service at the Sears Home Services website. A 10% discount coupon is available when service is set online. 

If you decide to take on this repair yourself, I will be happy to provide instructions to assist you.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. Wear appropriate hand protection when working around sharp metal parts.

If you have any follow-up questions, please continue our conversation on this existing thread.

Thanks again for choosing

Read More
James -
Sears Technician
August 14, 2013

Top Parts