Model #9114132993 KENMORE Built-In Oven, Electric

  • Control Section
    3 Results
  • Wire Harnesses And Components
    3 Results
  • Upper Door Section
    3 Results
  • Lower Door Section
    3 Results
  • Door Lock Section
    3 Results
  • Body Section
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Why won't the bake or broil work on my Kenmore Oven model number 911.4132993?


The elements themselves and the wire connections will need to be checked but the problem will most likely be the electronic control. It would be very rare for both elements to go out at the same time. The elements can be pulled out to check, by removing the screws holding them in place. Make sure the power has been disconnected first . Check the wire connections first when the elements are out. If the connections are ok, you will now need to remove the wires from the terminals to check the resistance. Now place the meter leads across both terminals and if you get a resistance reading, the element is ok. Attached is a diagram that shows only the control in the circuit to the elements. If you do not feel comfortable performing this task you can schedule service to have a technician perform this repair at

Read More
Luis L -
Sears Technician
April 22, 2010

Top Parts