Model #9113658813 Kenmore slide-in range, gas

  • Main Top Section
    3 Results
  • Oven Body Section
    3 Results
  • Door Lock Section
    3 Results
  • Top Burner Section
    3 Results
  • Broiler And Oven Burner Section
    3 Results
  • Oven Door Section
    3 Results
  • Wire Harness And Options
    3 Results
  • Optional Rear Main Top Filler 8028790
    3 Results
  • Optional Vertical Trim Extension 8068690
    3 Results

Question and Answers

Q:

can't find info on model 911.3658813 9113658813

A:

 

Thank you for your question and I understand your concern.

The only wiring diagram available is below. The wiring diagram was on a micro-fiche card which I add to take a picture off. I hope this is helpful.

The relay board supplies the voltage to the electronic oven control.  You will need to measure the line voltage across the black wire connected to terminal L1 and the white wire connected near the Black wire. The wiring diagram did not indicate a terminal number for the white neutral wire but it will likely be marked with a letter N. If you have voltage across these two wires and the oven control will not power up, the relay board is most likely faulty.

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.


 

Read More
Joey S -
Sears Technician
February 20, 2013
A:

Thom: The image is my first response and there is no service manual available nor is the Owner's manual.

Read More
Joey S -
Sears Technician
February 21, 2013
A:

Tom: I added the image again. Look below and double click on it.

Read More
Joey S -
Sears Technician
February 21, 2013
See more answers