Model #91130469895 KENMORE wall oven, gas

  • Control Panel
    3 Results
  • Wire Harness & Wiring Components
    3 Results
  • Gas & Burner Parts
    3 Results
  • Body Parts
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results

Error Codes

Error Code:



Question and Answers


Kenmore stove Model 91130469895 oven is not working. Broiler works fine.


Thank you for your question and I understand your concern. The bake burner should operate like the broil burner. When the oven is set to bake, the bake igniter must glow red and pull enough current/amperage to cause the gas valve to open.

The bake igniter is likely broken or too weak to open the bake valve. If the bake igniter is glowing red and the bake burner never ignites, replace the bake igniter.

If the bake igniter is not glowing, it could be broken or it could have a faulty electronic oven control (EOC). I added an image below with the wiring diagram and additional information.

To access the bake burner and bake igniter, the floor of the oven must be taken out and the flame spreader located below the oven floor. If the igniter is not glowing, the igniter can be disconnected and tested for continuity with an Ohm meter. If the igniter measures continuity then I would have to suspect a faulty electronic oven control/clock assembly.

NOTE: Disconnect the wall oven from the power source before removing the oven floor.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
February 20, 2012