Model #9011-1 GENERAC Generator

  • Sheet Metal
    3 Results
  • Base & Pulley Bottom
    3 Results
  • Generator & Panel
    3 Results
  • Base & Pulley Side
    3 Results
  • Gasoline Carburetor
    3 Results
  • V-twin Engine
    3 Results
  • V-twin Engine
    3 Results
  • V-twin Engine
    3 Results
Find part by diagram >

Question and Answers

Q:

kenmore electric oven electric cord

A:

Here is a link for the full installation guide for that model of range (790.90113000): Installation Instructions . The image below shows the power cord requirements from page 3 of that manual. You will need to check the electrical outlet that the range will be plugged into. This will determine whether you need a 3-prong or 4-prong electric cord kit. Once you determine the type of outlet that the range will use, you can select the proper 50 amp/1 3/8" diameter cord kit. Your local Sears store should have the proper power cord.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
November 30, 2010
Q:

I hve Sears Snow Blower Mod 536.886440 that need impeller spring pin. Part 454565 is wrong as it is 1/4 inch when 1/8 inch is needed. How do I get right part?

A:

To get the correct spring pin for the impeller on your snow thrower look on the page that says "frame assembly" but is really the gearbox and impeller. The spring pins are item 341. The part number is STD572512 and the cost is $2.16 for a package of 2 pins.

The part number 454565 should cross over to STD572512. I think someone picked up the wrong package when your order was filled. If you order the STD572512 you should get the right pins.

Read More
Jimmy K -
Sears Technician
May 20, 2010
Q:

My Sears Kenmore Dryer, Model # 11064602300 runs fine, but no heat.

A:

Hi Glenna,

Thank you for submitting a question to Manage My Life.

Here is a link to a previous question on the same kind of dryer with this issue; My Kenmore dryer is not heating. Would it be hard to fix? . Follow Lyles troubleshooting in his answer to this question.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed; Sears Parts Direct .

I hope this is helpful. Check the things covered here, and if I may be of further assistance, include more details in a reply to this post.

Landell

Read More
Landell -
Sears Technician
January 23, 2012